There is interesting UAVs that use flapping wings to fly
like a bird. The details of the physics and aerodynamics of flight using flapping
wings are beyond our scope, but the basic aerodynamics can be appreciated based
on the same mechanisms for generating aerodynamic forces that we have outlined for
fixed wings. The flapping of the wings of birds is not a pure up and down or
rowing backstroke as commonly thought.
While designing such UAVs made such observations
that can help to understand the concept on a omkar pande brid aerodynamic review similar projects. The wings of a flying
bird move up and down as they are flapped, but they also move forward due to the
bird’s velocity through the air mass. Shows the resulting velocity and force
triangles when the wing is moving downward. The net velocity of the wing
through the air mass is the sum of the forward velocity of the bird’s body (V)
and the downward velocity of the wing, driven by the muscles of the bird (w),
which varies over the length of the wing, being greatest at the wingtip. The
resulting total velocity through the air mass is forward and down, which means
that the relative wind over the wing is to the rear and up.
The net aerodynamic force generated by that relative
wind (F) is perpendicular to the relative wind and can be resolved into two components,
lift (L) upward and thrust (T) forward. The velocity and force triangles vary along
the length of the wing because (W) is approximately zero at the root of the
wing, where it joins the body of the bird and has a maximum value at the tip of
the wing, so that the net force, (F) is nearly vertical at the root of the wing
and tilted.
Furthest forward at the tip. As a result, it
sometimes is said that the root of the bird’s wing produces mostly lift and the
tip produces mostly thrust. It is also possible for the bird to introduce a variable
twist in the wingover its length, which could maintain the same angle of attack
as (w) increases and the relative wind becomes tilted more upward near the tip.
This twist can also be used to create an optimum
angle of attack that varies over the length of the wing. This can be used to
increase the thrust available from the wingtip. The above diagram shows how
flapping the wing up and down can provide net lift and net positive thrust. The
direction of the relative wind is tangent to the curved line that varies over
the up and down strokes. To maximize the average lift and thrust, the angle of
attack is selected by the bird to be large during the downstroke, which
creates a large net aerodynamic force.
This results in a large lift and a large positive thrust. During the upstroke, the angle of attack is reduced, leading to a smaller net aerodynamic force
This means that even though the thrust https://drone2495.blogspot.com/ this
is now negative, the average thrust over a complete cycle is positive. The lift
remains positive, although smaller than during the upstroke. The bird can make
the negative thrust during the upstroke even smaller by bending its
Wings during the upstroke as shown above diagram.This
largely eliminates the forces induced by the outer portions of the wings, which
are the most important contributors to thrust, while preserving much of the
lift produced near the wing roots. This simplified description of how flapping
wings can allow a bird to fly is a far as we are going to go in this
introductory text. There are some significant differences between how birds fly
and how insects fly, and not all birds fly in exactly the same way. In the early
days of heavier-than-air flight, there were many attempts to use flapping wings
to lift a human passenger. All were unsuccessful. As interest has increased in
recent years in small, even tiny, UAVs, the biomechanics of bird and insect
flight is being closely re-examined and recently have been successfully
emulated by machines in the field of UAV.